Can Krusher Woodworking Project Plan

Make your own Monster Can Krusher! Better than the flimsy store bought ones and so easy to use–even for the kids! Mounts to wall studs. Make it from 3/4″ wood and our full size pattern.

Order Krusher Parts Kit #W1370KIT separately

More InfoDimensions: about 22″ tall

Wood:
one 1X6 x 42″ piece of pine or 3/4″ thick plywood
one 3 1/2″ x 8 3/4″ piece of 3/4″ thick birch plywood or 3/4″ thick hardwood
one 1″ dia. x 5 1/4″ long wood dowel

Hardware: required for assembly
eight #10 x 1 1/2″ long, flat head screws
three 5/16″ dia. x 7 1/2″ long bolts
one 5/16″ dia. x 6″ long bolts
two 5/16″ dia. x 2″ long carriage bolts
four 5/16″ dia. lock nuts
fourteen 5/16″ I.D. washers

Tools:
table saw or circular saw, band saw or hand held sabre saw with a smooth cutting non-chipping blade, coping saw
drill with 7/64″, 3/16″, 5/16″, 3/8″ and 1″ dia. drill bits
hammer
screwdriver

Supplies:
transfer paper, pencil & clear tape
sand paper-medium & fine grits
wood filler-non shrinking, fast drying for wood flaws
paint brush-2″ wide brush
wood glue-exterior

Sealer:
high grade, non-yellowing, semi-gloss UV protected project sealer for indoor protection (#INDRQT)