GIGANTIC Gingerbread Man Woodcraft Pattern

This season your yard will be the showcase of the neighborhood with this gorgeous, giant display! It’s simple to make Gingerbread Man from plywood with our full-size pattern and a jigsaw.

Goes well with our GIGANTIC Christmas Tree and Gifts Pattern #W2269.

Don’t let the size intimidate you though—this project is actually quite easy to make. The entire display shown can be cut from just a single sheet of plywood using a hand-held jigsaw.

And you’ll get started quickly because our Premium 4’x8′ pattern has every full-size piece precisely laid out, ready to trace. Of course, step-by-step instructions are always included to ensure your success.

(89″ tall)

More Info

Dimensions:
70″ wide x 89″ tall

WOOD:
One 48″ x 96″ x 3/4″ thick piece of exterior plywood.

TOOLS:
Hand held jigsaw (sabre saw) with a non-chipping, scrolling blade, drill and 3/16″ dia bit.

HARDWARE:
Screws – Ten #8 x 1-1/4″ long, flat head.
Stakes – Two 3/8″ dia. x 18″ long, fiberglass (2 – #YS18).
Clamps – Four 3/8″ w/screws (1 pack – #YSC2).

SUPPLIES:
Transfer paper (#CARB), pencil & clear tape.
Sand paper – medium & fine grits.
Wood filler – non shrinking, fast drying for wood flaws.
Paint brushes – 2″, 1″ and fine detail.

PAINT:
White water base primer (#PRIMQT) for a base coat and the following suggested colors of Delta Craft paint:
2054-Golden Brown
2074-Ocean Blue
2076-Crimson
2084-Lisa Pink
2421-Jubilee Green
2505-White
2506-Black

SEALER: High-Grade, Non-Yellowing, Semi-Gloss, UV Protected Project Sealer (#POLYQT) for Exterior use.